Installation and Using Tips of KTMflash and KTMOBD ECU Programmer

New arrival KTMflash ECU is a tool which could read-write ECU data, read transmission data etc. It could read Infineon and gearbox transmission ECU. KTMOBD ECU Programmer is now available in eobdtool as well. It could read chip data, read ECU data and read gearbox in a high speed.

In the following post will post some installation tips and using note about these two programmers.

Installation and using tips of KTMflash:

1.  Only use the software we suggested

2.  There is no software like ECU Flash on the computer you want to install. Please reinstall your computer system before install the software according to our installation guide video to avoid locking.

3.  Do not use this software while network connected.

4.  We suggest using the computer based on Intel Processor. We have tested that the software only could use one time on computer based AMD Processor.

5.  There are KTMflash software introduction and test operation video in the CD we send to you which could help you to use the KTMflash well.

6.  You could look up the KTMflash introduction to check the supported ECU.

7.  Read password data before read encrypted Infineon and ECU. Please follow the video guide.

8.  Follow the reference video and introduction to handle the switches

Here post an installation guide of KTMflash:

https://youtu.be/KJq2puHM2y0

Installation and using tips of KTM OBD:

1.  Only use the software we suggested

2.  There is no software like ECU Flash on the computer you want to install. Please reinstall your computer system before install the software according to our installation guide video to avoid locking.

3.  We suggest using the computer based on Intel Processor. We have tested that the software only could use one time on computer based AMD Processor.

4.  Do not use this software while network connected.

5.  KTM OBD ECU Programmer is a tool mainly used to read and write Japanese vehicles’ ECU via OBD.

Also, an installation guide of KTM OBD post here:

https://youtu.be/Sr_l7BjifUE

if you want to know more about these two programming tools, please click

KTMflash: http://www.eobdtool.co.uk/wholesale/ktm-flash-ecu-programmer.html

KTMOBD: http://www.eobdtool.co.uk/wholesale/ktmobd-ecu-programmer.html

NEW sale in eobdtool.co.uk:

Yanhua ACDP

OVDSTAR X300 DP Pad2

Mart tool

Want to Download Ksuit 2.47 for Free? Download Links are Here

Kess 5.017 With NEW K-Suite 2.47 with exactly 7400 Vehicles added.

Source 1:

Ksuite_2.47 for Kess v2 5.017 clone

https://mega.nz/#!Sx8i3JQK!XC2WUVHJCSf3bKg4niJhyaL3444uz8GcSvCXmZi4jeI

DLL

https://mega.nz/#!C4kHVTzb!UOwqWrLM8-jr86MJLCLhZw-srYuAklVUOv0V6PPSSDA

No need HWID and KG.
Unpack DLL from archive in folder Ksuite/DLL.

Credits to svvag2000.

OS: With clean new install 2.47 ,work fine on all 32 bit, win7 64bit and x86.
newer DLL files also installed.

Installation guide: Unpack ksuite and unpack dll files and copy dll files in dll folder in new ksuite 2.47 folder and run ksuite.exe from there. Don’t copy new ksuite in old install folder.

Source 2:

Firstly, download Software from the below link

https://mega.nz/#!r8wDSbjL!B8saSeQWJE4edxgZ7KJJHPqCmxigtZQ2JpMPw_Su5MY

Password: CarTechnoloGY.co.uk

License Locked to one PC Machine

then Run Software and Click Ctrl + C to copy Machine ID

and finally past your Machine id to get One/Working license to run your software

Source: volavka

Test reports:

Tested on Polo 2011 tdi with PCR 2.1 unlock by obd. unlocking of PCR2.1 eeprom work all by obd like cmd..activate boot..read..unlock..write mod.yob done.

K-Suite 2.47 VS 2.23:

Caterpillar A5E2 P549
VOLVO 1.6/2.0 Continental SID807 P489
Ford Truck FPT ENGINE BOSCH EDC7U31 KLINE P548
Husquarna KEIHIN P554
ALL SIMOS18 18.1 18.2 NEW GENERATION 4,5mb
MUCH NEW VERSIONS ON OLD PROTOCOLLS
MANY CHECKSUM BUGS FIXED

K-Suite 2.47 adds 7400 Vehicles

Ksuite 2.47 FAQs:
Q: This Ksuite 2.47 gives something extra out of 5.017 fw, more than 2.23 sw? Really?
A:Installing a higher version of Ksuite does not bring new protocols but adds ECUs to existing protocols and a lot of bug fixes and checksums fixes, Simos18 4.5MB…
This is not useless and the grayed out protocols are not really a problem.
And Ksuite 2.47 is even better with Kess firmware v2 5.028. Work with simos18 very good. If you don’t have a good Kess fw 5.028, firmware 5.017 is the best online option for you.
Q: Does not block the ktag?
A: No Ktag 7.020 only works with 2.25 highest. 2.47 is for Kess 5.017